The V100 is the compact, low-power Defend-O-Tron. It is built on the FriendlyElec NanoPi R5S board, in a metal enclosure.
| Part | V100 |
|---|---|
| Processor | Rockchip RK3568B2, quad-core ARM Cortex-A55, up to 2.0 GHz (ARM64) |
| Memory | 4 GB LPDDR4X |
| Storage | 32 GB eMMC, plus an M.2 NVMe SSD (PCIe 2.1 x1; size varies) |
| Network | One 1 GbE port (MGMT0) and two 2.5 GbE ports (ISP-IN, ISP-OUT) |
| Display | HDMI, for a monitor at the device |
| USB | Two USB 3.2 Gen 1 Type-A ports |
| Serial console | 3-pin debug UART, 3.3 V, 1,500,000 bit/s |
| microSD | One slot, used for recovery |
| Buttons | MASK button, used for recovery |
| LEDs | SYS, WAN, LAN1, LAN2 |
| Real-time clock | Battery connector for the RTC |
| Power | USB-C Power Delivery, 5, 9 or 12 V |
| Working temperature | 0 °C to 70 °C |
| Board | 8-layer PCB, 62 × 90 mm |
The chip also has a GPU and a 0.8 TOPS NPU. The Defend-O-Tron firmware does not use them.
The board figures are from the maker’s NanoPi R5S specifications. The device keeps its metrics for 90 days.
For local access, connect a monitor and a USB keyboard, or use the serial console: see Installation Guide. To recover it, use the SD card and the MASK button: see Recovery and Reinstall.

The speeds shown are maximums under ideal conditions.


